Choose your language: slo
The new FW series of automatic vacuum packaging machines with flow pack system is designed in line with the Industry 4.0 and IoT (Internet of Things) technology platforms. The version with welding system, with a rotating welding knife, consists of six components (four with upper reel and two with lower reel). It enables the packaging of a wide range of irregularly shaped and small-sized products, which arrive in the machine loose (single doses) or pre-assembled (multiple packages).
The opening wheels, which perform the operation of pulling, longitudinal welding and folding of the film, make the process simple and fast. The products are packed in packages of plain or bonded flexible material with a maximum output of between 60 and 200 products/minute (depending on the model selected).
Do you have any other questions? Contact one of our experts.
+386 1 510 31 80 / info@intercommerce.si
| Power supply | 220 - 240 V |
|---|---|
| 1PH+N+PE | |
| 50/60 Hz | |
| Installed power | 2650 W |
| Compressed air | - bar |
| Closing rod | 150 mm |
| Maximum product height | 60 mm |
| Speed to | 80 packets per minute (ppm)* |
| Maximum film size | 300 - ø 300 mm |
| Machine size | 2645 x 795 mm |
| h 1590 - 1690 mm | |
| Net machine weight | 330 kg |
Standing characteristics:
– High flow reel packing machine
– Rotating rod sealing system
– Sliding surfaces of AISI304 products
– Infeed conveyor with adjustable guides and easily removable inter-paddles
– Longitudinal sealing consisting of 2 pairs of drive wheels, the first pair pulling the film and the second pair sealing it
– Manual wheel opening for longitudinal sealing
– High reel carrier with mechanical coupling
– Manual closing of the reel carrier shaft
– Standard dynamic film former with numeric position indicator
– Cross sealing with 150 mm wide bar – 5.91″
– Changing the height of the sealing rod position using the lever
– Motorised conveyor for product exit, adjustable in height by means of a lever
– Product waste collection compartments, under the full length of the infeed conveyor
– Printed film centring device, without product – without bag, including film reel end sensor
– Motor configuration controlled by inverters: inlet conveyor/downstream sealer/outlet conveyor with independent asynchronous motors
– Configuration of motors controlled by drivers: cross seal with brushless motor
– Machine stop in phase
– FLXMOD® control system equipped with:
– Operator interface with panel PC and 7″ colour touch screen with PLC user interface
– IN/OUT control modules for digital, analogue I/O and thermocouple readout control.
– This system allows simple and precise control of all operations, such as:
– two sealing temperature settings: one on the longitudinal seal and one on the transverse seal
– electronically controlled conveyor speed
– process statistics:
– packet counter
– current production
– machine efficiency
– Up to 50 different duty cycles can be planned
– Emergency button
– Reduced energy consumption
– Compliance with CE regulation
